Product Features  

■  Three-way four-unit anti-compression stage speaker (CAT KING patented product)

■15-inch high-sensitivity low-frequency speaker, 3-inch (76.2.mm) heat dissipation voice coil

■Integrated dual-horn dual high-frequency components, 3+1.4-inch titanium diaphragm high-frequency driver compressor 

■ 110° x 70° constant coverage range for  uniform and smooth on-axis and off-axis response 

■Equipped with anti-collision guard strips to reduce damage during frequent use

■Two ABS casters at the bottomfor easy movement

■High-frequency signal limiting design to protect the high-frequency driver from excessive power without interrupting performance 

Product Overview

The most classic  Pro2.5  is a three-way high-sensitivity speaker, and the low frequency adopts advanced anti-compression audio technology. It is a high-output full-range speaker optimized for rental or touring applications.  It can play a role in a variety of different application venue sand provide a continuous high boost level and sufficient carrying power. Different from similar products: This product consists of a 1.4″ ultra-high frequency driver and a “3” (74.4mm) titanium high frequency driver to form a dual high frequency output system, aiming to obtain a wider range of high frequency response while increasing its carrying power . Unlike competitors, the two 3″ (76.2mm) heat dissipation voice coils and the high-efficiency 15″ low-frequency driver with 200mm magnets use reverse compression technology, which can obtain a better low-frequency lower limit and higher sensitivity. Pro2.5  uses all drive units independently developed by CAT KING. The parameters and performance of the units are also tailored by engineers according to the product positioning, and the performance parameters are highly matched. The scientific crossover point and low-loss crossover circuit design will not cause interference even under extremely high sound pressure, and it is highly balanced and highly restores the real sound . The multiple handles on the side and the humanized bottom caster design can be used during heavy touring activities. Save energy, More convenient and faster movement . Unique titanium gray coating; combined with the ABS shell protection module design, it avoids damage to the device during frequent movement.

Technical Specifications  

   Model Name                                       Pro2.5
Product design                Three-way rental/roadshow stage speaker
Product type                2×15-inch full-range passive speakers
Rated impedance                4 Ohm
Power handling capability : 
Rated power AES (W)                1200W
Long-term maximum signal power MUSIC ( W)                 2400 W
Short-term peak power PEAK 10ms ( W)                 4800 W
Sensitivity                 98dB SPL 1W@1m
Frequency response (+-3dB)                46 Hz – 18 KHz
Frequency response (+-10dB)                42 Hz – 20 KHz
Crossover frequency MH/HF                 2.8KHz / 1.2KHz (passive)
Sound pressure level (1M) continuous/maximum dB                126dB/132dB (calculated)
  Driver part
LF low frequency driver:                 LF15200F-76
LF Size                380 mm (15 inches)
LF voice coil size                 76.2 mm (3 inches)
LF magnet structure                 200mm Ferrite Coil
LF Frame Material                  Aluminum cone
HF high frequency driver: MH/HF                  HF170F-3 / HF100F-1.4
HF high frequency driver type                  Dome Compression Driver
HF coil size MH/HF              74.4 mm (3 inches) / 34.4 mm (1.4 inches)
HF port size MH/HF                  38 mm (1.5 inches) / 26 mm (1 inch)
HF high frequency magnet structure MH/HF                                          170mm/100mm Ferrite Coil
HF diaphragm material                               Titanium
Horn waveguide type                   Integrated constant square double horn 
Nominal coverage  (HxV)                  110° × 70°
Protect                  Independent high frequency electronic RMS limit
  Box and accessories
Input Connectors                 2 x XLR sockets (1+ / 1-) with junction box
Rigging and Hardware              9 M8 eyebolt mounting points
handle              3 on the side, 1 on the back, 7 in total
Box shape              Ladder CNC manufacturing  
Housing material and surface treatment              18mm multi-layer birch board
Shell coating and color              Titanium grey fine dotted cover
Grille Materials and Treatments              Black perforated mesh Moisture-proof and dust-proof acoustic mesh backing
Move and protect              2 casters at the bottom , 2 rubber pads, 2 ABS anti-collision protection modules at the top and bottom
Product Dimensions  – Unpackaged: 
Front height             1260 mm (49.6 in)
Rear height             1260 mm (49.6 in)
Front width             520 mm (20.47 in)
Rear width             350 mm (13.78 in)
depth             695 mm (27.36 in)
Product Dimensions  – Packaging: 
high            1300 mm (51.18 in)
Front width             645 mm (25.39 in)
Rear width          420 mm (16.54 in)
depth            760 mm (29.92 in)
weight : 
net weight              72 kg (159 lbs)
gross weight             77 kg (170 lbs)